Concrete Footing 35 kg | Strong Base for Heras Fences
- Article Code: D0100
- Height: 135 mm
- Width: 710 mm
- Depth: 226 mm
- Weight: 35 kg
- Package Quantity: 24 pcs / pallet
- Material: C35/45 reinforced concrete
- Post Compatibility: 40 × 40 mm, 42 mm, 48 mm
- Edge Hole: Yes
- Central Slot: Yes
- Finish: Grey, sealed
- HS Code (GCC): 68101990
- Unit Price (Qatar): USD 6.20 – 7.50
Category：Heras Fence, Product, Temporary Fence, Temporary Fence Blocks
Introduction
Concrete footing 35 kg secures every Heras mobile fence.Reinforced concrete makes a firm base in high wind.Square holes let poles pass for extra hold.Edge holes cut trip risk for walkers.When you set up mobile fences, stability is key. BMP’s Concrete Footing 35 kg ensures your fencing stands firm even under tough conditions. Made from strong reinforced concrete, this footing provides unbeatable support. Easy to handle, durable, and highly reliable—perfect for your fencing solutions.
“The Olympics draw crowds. We use BMP footings for safe flow,” – Event planner, Paris 2024.
Materials Needed:
- Concrete mix (standard or quick-setting)
- Water
- Steel reinforcement bars (rebar), optional but recommended
- Plastic molds (specific footing molds or custom-made)
- Lubricant or release agent (e.g., vegetable oil or mold release spray)
Step-by-Step Process:
Step 1: Prepare the Molds
- Apply lubricant or mold release agent evenly inside each mold to ensure easy removal after drying.
Step 2: Mix Concrete
- Mix the concrete in a wheelbarrow or concrete mixer.
- Use approximately 1 part cement, 2 parts sand, and 3 parts gravel or a ready-mix concrete blend.
- Add water slowly until you achieve a thick, oatmeal-like consistency.
Step 3: Insert Rebar (optional) Concrete Footing 35 kg
- Cut steel rebars to the desired length.
- Place the rebars in the molds horizontally or vertically, reinforcing the concrete for added strength.
Step 4: Pour Concrete
- Pour the concrete into the molds carefully, filling to the top.
- Vibrate or tap the mold gently to remove any air pockets, ensuring the concrete settles properly.
Step 5: Insert Post Holes
- Place pre-made plastic inserts or temporary fence panel legs into the concrete.
- Ensure holes or inserts remain straight and correctly spaced for your fence panels.
Step 6: Smooth the Surface
- Smooth the concrete’s surface using a trowel or a flat wooden board for an even finish.
Step 7: Cure the Concrete Concrete Footing 35 kg
- Allow the concrete footings to dry and cure for at least 24-48 hours.
- For maximum strength, allow curing for approximately 5-7 days.
Step 8: Remove from Molds
- Carefully remove the concrete footing from molds once fully dried.
- Store on a flat surface until ready for use.
Key Tips:
- Ensure proper dimensions, typically around 600-700 mm long, 200-250 mm wide, and 100-150 mm high.
- Ideal weight ranges from 20 kg to 35 kg, providing stability without being too heavy for handling.
- Maintain even spacing and accurate measurements between post holes.
Key Advantages Concrete Footing 35 kg
- High weight locks every Heras panel in strong wind.
- Reinforced concrete resists cracks and long use.
- Edge and center holes give flexible post options.
- Low profile lowers trip risk for walkers.
- Square anti-lift holes deter theft and tampering.
- One worker can move it with a small dolly.
- Works with BMP stabilisers for extra storm safety.
- Best Conditions to Use These Concrete Footing 35 kg
- Sites facing winds above 60 km/h or gusty coastlines.
- Crowded events where foot traffic demands flat bases.
- Long, straight runs that need stable, gap-free joints.
- Semi-permanent fences kept up for months.
- Uneven ground once leveled and compacted to 150 kPa.
- Urban streets where tripping hazards must stay low.
🌟 BMP 🌟 Applications of Concrete Footing 35 kg
- Concert and sport perimeters
- Busy city worksites
- Long coastal fence runs
- Semi-permanent crowd lanes
- Heavy-wind construction zones
🌟 BMP 🌟 Key Benefits of Concrete Footing 35 kg
- High weight stops fence lift
- Reinforced mix lasts many cycles
- Central or edge post fit options
- Anti-lift square holes fight theft
- Single worker can place with dolly
🌟 BMP 🌟 Complete Concrete Footing 35 kg
| Feature | Detail |
|---|---|
| Article Code | D0100 |
| Height | 135 mm |
| Width | 710 mm |
| Depth | 226 mm |
| Weight | 35 kg |
| Package Qty | 24 pcs / pallet |
| Material | C35/45 reinforced concrete |
| Post Fits | 40 × 40 mm, 42 mm, 48 mm |
| Edge Hole | Yes |
| Central Slot | Yes |
| Finish | Grey, sealed |
| HS Code (GCC) | 68101990 |
| Unit Price (Qatar) | USD 6.20 – 7.50 |
🌟 BMP 🌟 Conditions for Use Concrete Footing 35 kg
- Ground must be flat and compact
- Check soil load rating above 150 kPa
- Avoid placement on loose sand
- Pair footing with BMP stabilisers in gusts > 90 km/h
- Add extra ballast on scaffold turns
🌟 BMP 🌟 Customer Feedback – Qatar
“Desert winds hit 70 km/h. BMP concrete footing 35 kg held every panel tight. Zero shifts in 30 days.”
– Fahad A., Doha contractor
🏅 Conclusion
BMP’s Concrete Footing 35 kg provides unmatched stability and durability for mobile fencing solutions. Whether you need secure fencing for construction, events, or wind-exposed sites, this footing delivers peace of mind. Trust BMP for quality and reliability every time.
