Chain Link Fence Installation gives strong security at low cost. The mesh allows light and air. The system suits homes, schools, farms, and factories. Follow this guide for the best results.
Benefits of Chain Link Fence Installation
- Quick build time saves labor.
- Galvanized or PVC coat stops rust.
- Open weave keeps wind load low.
- Repairs need only simple tools.
- Parts fit slopes and uneven ground.
Safety Tips Chain Link Fence Installation
- Wear gloves, boots, and eye glasses.
- Keep kids and pets away from the dig site.
- Mark all buried cables before digging.
- Lift posts with straight back to avoid strain.
- Turn power tools off when you move them.
Working on Slopes
- Step posts downhill to keep mesh level.
- Shorten post spacing on steep ground.
- Cut mesh to fit the slope neatly.
- Use extra ties at low points for strength.
Coating Choices and Lifespan
| Coating Type | Look | Expected Life | Best Use |
|---|---|---|---|
| Galvanized | Silver | 15 – 20 years | Budget sites |
| PVC Black | Matte | 20 – 25 years | Parks, playgrounds |
| PVC Green | Satin | 20 – 25 years | Gardens, farms |
| Alu-Zinc | Bright | 25 – 30 years | Coastal zones |
Cost Estimate Example
| Item | Unit Price | Units per metre | Cost per metre |
|---|---|---|---|
| Mesh 9 g | $4.00 | 1 | $4.00 |
| Line post | $10.00 | 0.33 | $3.30 |
| Concrete | $7.00 | 0.33 | $2.31 |
| Top rail | $5.00 | 1 | $5.00 |
| Ties and bands | $1.20 | 1 | $1.20 |
| Total | $15.81 |
Prices are sample only. Adjust to your local market.
Common Mistakes and Fast Fixes
- Loose mesh → Re-stretch with come-along.
- Posts out of line → Shift while concrete still wet.
- Gate sags → Add diagonal brace inside frame.
- Rust at cuts → Spray cold-gal paint right away.
Optional Upgrades
- Privacy slats block sight and wind.
- Razor wire adds high security.
- Solar lights improve night safety.
- Colored caps give a clean finish.
Local Code Checklist
- Check max fence height rules.
- Keep set-back from sidewalks as required.
- Use approved gate latch for pools.
- Call inspectors if permits need sign-off.
Crew and Time Plan
| Task | Workers | Time per 50 m |
|---|---|---|
| Mark line | 2 | 1 hour |
| Dig holes | 3 | 4 hours |
| Set posts | 3 | 2 hours |
| Hang mesh | 2 | 3 hours |
| Fit gate | 2 | 1 hour |
Green Tips Chain Link Fence Installation
- Choose recycled steel posts when possible.
- Reuse old mesh for animal pens.
- Recycle leftover wire at scrap yards.
Tools and Materials
| Item | Use |
|---|---|
| Tape measure | Check lines and post gaps |
| Stakes and string | Mark the fence path |
| Post hole digger | Make clean holes |
| Spirit level | Keep posts upright |
| Concrete mix | Lock posts in ground |
| Line posts and terminal posts | Hold mesh and rails |
| Top rails | Link posts together |
| Tension wire | Tighten lower edge |
| Chain link mesh | Main barrier |
| Tension bars and bands | Fix mesh to posts |
| Tie wires | Bind mesh to rails |
| Hinges and latch | Hang the gate |
Planning the Work
- Check property lines before digging.
- Call local utility firms to mark hidden pipes.
- Measure the total run for materials.
- Locate gates at clear, level spots.
Step-by-Step Chain Link Fence Installation
Chain Link Fence Installation-Mark the Fence Line
Drive stakes at corners and ends.Pull string tight between stakes.Keep the line straight.
Dig Post Holes step-Chain Link Fence Installation
Excavate terminal holes thirty centimeters wide, sixty centimeters deep.Make line post holes slightly smaller.
Set Terminal Posts
Place end, corner, and gate posts first.
Pour wet concrete around each post.
Use a level to keep plumb.
Let concrete cure for two days.
Set Line Posts
Stretch the string again for accuracy.
Space line posts three meters apart.
Insert each post.
Fill holes with concrete.
Re-check alignment.
Attach Fittings and Top Rail
Slip caps on all posts.
Slide top rail through line caps.
Secure rails to terminal posts with bands.
Hang the Mesh
Unroll chain link mesh on ground.Stand it upright against posts.Insert a tension bar at the starting end.Bolt the bar to tension bands on the first post.
Stretch the Mesh
Hook a come-along and pulling bar near the far post.Crank until mesh feels tight yet flexible.Insert second tension bar.Bolt it to the far post bands.
Tie the Mesh
Wrap tie wires every forty centimeters along top rail.Tie wires midway up each line post.Install bottom tension wire to stop sag.
Chain Link Fence Installation- Gate
Bolt hinges to gate post.
Hang gate frame.
Adjust for smooth swing.
Fit latch and padlock loop.
Finishing Touches
- Check all bolts for tight fit.
- Clip wire ends flush.
- Apply cold-galv spray on cut edges.
- Backfill any low spots near posts.
Chain Link Fence Installation Maintenance Tips
Inspect fence twice each year.
Tighten loose ties quickly.
Wash dirt with mild soap and water.
Touch up scratches to prevent rust.
FAQs
How long does Chain Link Fence Installation take?
Two people finish fifty meters in one weekend.
Can I skip concrete?
Concrete gives best strength. Gravel alone may shift.
What mesh gauge works for pets?
Choose nine-gauge for large dogs.
How tall should the fence be?
Pick height by need: garden, sport, or security.
Conclusion
Chain Link Fence Installation delivers speed, strength, and value. Gather the right tools, follow each step, and keep posts true. Maintain the fence yearly to enjoy decades of service. Need materials? Contact BMP for mesh, posts, gates, and expert advice.
