- Hole Diameter Options:
- 60 × 80 mm
- 80 × 100 mm
- 80 × 120 mm
- 100 × 120 mm
- 120 × 150 mm
- 90 × 1 (Note: last item seems incomplete or mistyped)
- Selvedge Wire Diameter Options:
- 2.4 mm
- 2.7 mm
- 3.0 mm
- 3.4 mm
- 4.0 mm
- Lacing Wire Diameter: Normally 2.2 mm
- Mesh/Openings Available:
- 37.5 × 75 mm
- 50 × 50 mm
- 75 × 75 mm
- 100 × 50 mm
- 100 × 100 mm
- Tensile Force Range: 300 – 750 N/m²
- Transport Package: Pallet
- Specification: Customizable as per client requirements
- Trademark: BMP
- Origin: China
- HS Code: 7314410000
- Production Capacity: 5,000 rolls per month
- Price: $12.38 – $41.22 per m2
Hexagonal Wire Mesh for Slope 110×80mm × 2mm – BMP Stabilization Net
Category：Hexagonal Wire Mesh, Product, RockFall Netting
Introduction
BMP’s hexagonal wire mesh for slope protection is a powerful tool to combat rockfall, soil erosion, and vegetation failure. Designed for complex terrain like steep, rocky, or mixed soil slopes, this mesh not only reinforces surface stability but also supports slope greening through hydroseeding or substrate spraying. With standard 2 mm galvanized or PVC-coated wire and large 110×80 mm mesh openings, it becomes a reliable foundation for safe, eco-friendly slope construction.
Unlike traditional slope treatments, BMP combines physical reinforcement with environmental landscaping. Whether you are stabilizing a roadside cliff or preparing a terraced green slope, this mesh works hand-in-hand with modern slope greening techniques.
📐 Specifications – Hexagonal Wire Mesh for Slope
| Parameter | Specification |
|---|---|
| Material | Galvanized steel wire / PVC-coated steel wire |
| Wire Diameter | 2 mm (minimum) |
| Mesh Opening Size | 110 × 80 mm |
| Coating Options | Galvanized / PVC coated |
| Packaging | Rolls, 25 rolls per pallet |
| Application Slope Range | 45° – 70° |
| Recommended Vegetation Coverage | More than 60% |
| Use Case | Slope greening, rockfall control, vegetation stabilization |
| HS Code | 73144100 |
| Reference Price | $58.40 – $72.90/roll |
🌍 🎯 Applications of Hexagonal Wire Mesh for Slope
🏔️ General Terrain Applications
- Steep rocky slopes
- Soil-rock mixed slopes
- Coarse soil slopes
- Cliffs near roads, railways, and buildings
🌱 Vegetation-Based Uses
- Thick substrate spray systems
- Hydroseeding support structures
- External-soil fixed slopes
- Vegetation bag & coir fiber net installations
- Landscaping and ecological restoration
🧱 Construction Integration
- Retaining wall coverage
- Combined with concrete surfaces (chunam finish)
- Used with lattice girders and nutrient soil bags
- Applied with reinforced concrete for artificial slopes
🌟 💪 Benefits of BMP Hexagonal Wire Mesh for Slope
- ✅ Supports Heavy Vegetation Growth: Roots grow through the mesh, stabilizing soil naturally
- ✅ Corrosion Resistant: Galvanized or PVC coatings extend lifespan
- ✅ High Strength: 2 mm wire withstands pressure and shifting terrain
- ✅ Environmentally Friendly: Enables planting even on cliffs and harsh soil
- ✅ Flexible Design: Adapts to any surface shape or rock curve
- ✅ Reliable in Harsh Conditions: Performs well in wind, rain, and erosion-prone areas
- ✅ Easy to Integrate: Works with modern greening techniques like hydro mousse
📦 Packaging Details Hexagonal Wire Mesh for Slope
- 🌀 Rolls packed tightly on pallets, 25 rolls per pallet
- 🪪 Each roll labeled for quick spec identification
- 📦 Wrapped with plastic for moisture protection during transport
- 🏗 Suitable for crane or manual unloading at remote slope sites
- 📜 Custom packaging for large projects or export available
📋 Conditions to Consider When Using BMP Hexagonal Wire Mesh for Slope
- 🌧 Surface Preparation: Remove debris, fill holes, and trim loose rocks before mesh installation
- ⛰ Minimum Convex-Concave Requirement: Keep surface variation within 10–15 cm
- ⚠ Mesh Placement: Extend 0.8–1 m over top of slope, 30 cm at bottom, and 20 cm at both sides
- 🔗 Overlap Method: Horizontal overlap: 20 cm, Vertical overlap: over 30 cm
- 🧱 Fastening: Use nails, steel wire, and anchors to fix the mesh tightly to surface
- 🌿 Substrate Layering: For rocky slopes, apply thick substrate before seeding
- 💦 Hydroseeding: Spray seeds, water, nutrients after substrate for lush growth
- ☀️ Sun Protection: Cover with non-woven fabric to preserve soil moisture
💬 Positive Feedback from Qatar
“We used BMP hexagonal wire mesh for slope greening on a 65° incline beside a highway tunnel. The 110×80 mm mesh performed perfectly, holding thick substrate and allowing grass and trees to grow strongly even under harsh sunlight. Excellent stability and coverage.”
– Engineer Saif A., Al Wakrah, Qatar
❓ FAQs – Hexagonal Wire Mesh for Slope
📏 What wire diameter is best for slopes?
2 mm is recommended. For very steep or rocky slopes, use double-layer mesh.
🌿 Can it hold plants on cliffs?
Yes. It’s designed to anchor substrate and soil on vertical or near-vertical terrain.
🧪 Is galvanized enough or should I choose PVC?
Use Hexagonal Wire Mesh for Slope ;PVC-coated mesh in coastal, humid, or long-term vegetation projects for maximum corrosion resistance.
🔧 Can I cut it on-site?
Yes. You can cut it with wire snips and tie overlaps using standard galvanized or PVC-coated binding wire.
🪵 Does it work with coir fiber nets?
Absolutely. It’s commonly laid over coir mats for biodegradable support and root grip.
✅ Conclusion
BMP’s hexagonal wire mesh for slope protection combines modern engineering with nature’s resilience. Its strong structure supports earth, rocks, and roots alike, ensuring safety while enabling lush green growth. Whether you’re working on a highway embankment, a vegetated retaining wall, or a landscaping cliffside, this mesh lets you build strength and beauty into every slope.
Need technical drawings or sample rolls? I can generate visuals or specs tailored to your slope project.
